The system is experiencing issues

Past Incidents

Friday 23rd October 2026

Helm WMS Performance issues on Helm

Resolved: Platform Performance Issues

We would like to provide an update on the slower than usual performance you may have experienced on the platform today, and confirm that it has now been resolved.

As has been widely reported in the news this week, security vulnerabilities have been identified in PHP, a technology used across much of the industry. We responded immediately by putting additional security measures in place across our platform, with the protection of your data and your account as our first priority throughout.

Applying that level of protection at short notice had a knock-on effect on speed, and the platform may have felt noticeably slower than normal throughout the morning. This was a deliberate decision on our part: a platform that remained secure and available, even at reduced speed, was a far better outcome than a suspension of service while the work was carried out.

Our engineering team has worked tirelessly to bring every setting back to a strong and robust position, delivering the same level of protection without the impact on performance.

Normal performance was fully restored at approximately 12:30 PM today (Friday, 23 October). The platform is now operating normally with the enhanced security measures in place. We will continue to monitor it closely over the coming days.

We understand that any slowdown can be disruptive to your operations and appreciate your patience and understanding while we worked through this.

If you are still experiencing anything unusual, please contact our Support Team through the usual channels.


We’re aware that some Helm customers are experiencing slower than normal response times and speed issues, particularly when packing orders. We’re sorry for the disruption this is causing.

As many of you will have seen in the news, the past few days have seen a major global security incident affecting PHP, and our team has been working to protect customers across our platforms. Separately, we’ve recently made a number of security and resilience changes to Helm, and our engineers are working through these now.

We’ve already made adjustments that have improved performance, further changes are being made now, and we’re working to restore full service to every affected customer as quickly as possible.

If the issue is stopping you from operating, please contact support at https://support.myhelm.app/

Thursday 22nd October 2026

No incidents reported

Wednesday 21st October 2026

PHP Security Updates

We’re writing to update all customers on the PHP security vulnerability disclosed this week.

Does this affect you?

If your account was not suspended or restricted this morning, no action is needed and you can disregard the rest of this email. Our latest software is not affected by this issue, and your service has continued as normal throughout.

If your account was suspended, or you were asked to provide IP addresses or email addresses for restricted access, please read on.

Access restored for legacy accounts

We have now successfully applied security patches to all of our legacy platforms. As the underlying vulnerability has been patched, we have removed the temporary access restrictions. You no longer need to sign in with a one-time email code or connect from a specific IP address. Your team can access the system as normal, and any integrations, such as API connections, will continue to work as before.

We’re sorry for the disruption this caused. We know the restrictions made things harder for you and your team, and we’re grateful for your patience. We take the security of your data extremely seriously, and in this case suspending and then restricting access was the right way to keep your account protected.

Looking ahead

Although your legacy system is now patched, older platforms will always be more exposed to issues like this. Security incidents are becoming more frequent across the industry, not less, and the safest way to ensure continuity of service is to run on our latest software.

Over the coming weeks, our team will contact legacy customers to arrange an upgrade to the latest version. Our onboarding team will support you through the whole process. If you’d like to get started sooner, just reply to this email and we’ll be in touch.

If you have any questions, please contact us via https://support.myhelm.app.

Thank you for your understanding.


You may have seen news coverage today about a security vulnerability in PHP. We want to let you know straight away: your data is safe, our applications are safe, and our team has already taken the necessary action.

What is PHP and why does it matter?

PHP is one of the most widely used technologies on the internet. It powers around 70% of the world's websites, including many of the largest platforms and businesses you use every day. Like much of the industry, our applications are built using PHP.

In the early hours of Wednesday 21 October, details of two newly discovered vulnerabilities in PHP became public. Because PHP is so widely used, this affects organisations right across the internet, and the UK's National Cyber Security Centre has asked all organisations to update their systems immediately.

What we have done

Our team was on it from around 3am. We identified the vulnerabilities across our platforms, applied the security patches, and confirmed that our systems are fully protected.

This is exactly what our security processes are designed for. We acted quickly, we acted decisively, and our current platforms are secure.

Customers on our current versions

You do not need to do anything. Your account is protected, your data is safe, and everything is running as normal.

Customers on our legacy platforms

As a precaution, we have temporarily suspended accounts on our older legacy platforms while we make sure they are fully protected. We know this may be inconvenient, but we will always put the security of your data first.

If your account has been temporarily suspended, simply contact us at via https://support.myhelm.app and our team will work with you to get you reinstated.

We take the security of your business and your data extremely seriously, and we are proud of how quickly our team responded. If you have any questions at all, please get in touch. We are here to help.

Spring GDS: Shipping Services Currently Unavailable

Resolved. Update from Spring:

The PHP security update has been successfully installed and tested, and you and your users can now access the platform and continue working as usual, including shipment creation and label generation.

As previously communicated, the temporary access restrictions were implemented purely as a precautionary measure to protect our services while we addressed a critical security vulnerability. We have no indication that customer data was affected at any point.

We would like to thank you for your patience, understanding, and cooperation while we worked to ensure the continued security and reliability of our platform.

If you experience any issues accessing the system or notice anything not working as expected, please contact us.


Spring GDS is currently experiencing a service disruption affecting shipment creation and label generation.

Spring GDS has temporarily disabled access to its API as a precautionary security measure. This issue originates directly from Spring GDS and is not related to The Despatch Company.

We have already contacted Spring GDS and provided our IP addresses for whitelisting. We are now awaiting confirmation that access has been restored.

We will provide further updates as soon as they become available.

Tuesday 20th October 2026

DPD API Service Disruption

We can confirm that this is resolved as of 14:00, as DPD mentioned in their latest update.


Latest update from DPD as of 13:30 UK Time mentions that Google expects the systems to be operational again by 14:00 today:

"We are writing to update you on the status of the Google Cloud Platform issues that are impacting our services.

Google have stated that they expect their systems to be operational again by 2pm today.

We will update you once we can confirm our systems are fully operational again."


Latest update from DPD as of 12:07 UK Time:

"We are writing to update you on the status of the Google Cloud Platform issues that are impacting our services.

This issue is still ongoing; multiple businesses across the UK have been affected by this outage.

Google have released the following statement:

"We are experiencing an issue with multiple services in europe-west2 beginning on Monday. Our engineering team continues to investigate the issue. We apologise to all who are affected by the disruption."

We are in constant communication with Google and working with them to resolve this issue, while also pursuing alternative solutions to get shipping back up and running as soon as possible.

We apologise for any inconvenience caused, and will update you when there are further developments."


Latest Update from DPD:

"We are aware of an issue accessing our MyDPD Portal and DPD Online due to the Google Cloud Platform.

This is impacting customer tracking, shipping, and API functionality. We are in constant communication with Google and working with them to resolve this issue, while also pursuing alternative solutions to get shipping back up and running as soon as possible.

We apologise for any inconvenience caused, and will update you when there are further developments."


We are currently aware of an outage affecting both the legacy and new DPD APIs.

We are closely monitoring the situation and will provide further updates as soon as more information becomes available.